Glossy Surface Silicone

Glossy Surface Silicone is specifically designed to create a glossy effect on the surface of silicone. Its greatest highlight is its excellent glossiness - Glossy Surface Silicone has a soft touch, bright luster, and strong light transmittance, meeting the high requirements for gloss in high - end printing. Glossy Surface Silicone is a slightly thin liquid with strong fluidity, making it very suitable for glossy treatment of ordinary high - density silicone or round - effect silicone. There is a small tip for use: print the glossy layer only once. When baking, don't rush to increase the temperature rapidly. Slow heating can prevent wrinkling. Select a 120 - mesh screen, which can ensure clear patterns and uniform material distribution. The best drying temperature is 120 - 150°C, which can achieve rapid curing, high efficiency, and also protect the fabric and the colloid. The finished product is shiny, elastic, and has sufficient viscosity.

The most prominent advantage is Glossy Surface Silicone's excellent glossiness, which can create a bright and translucent glossy effect, enhance the visual texture of the pattern, and meet the needs of high - end printing. The slightly thin liquid texture has strong fluidity, making Glossy Surface Silicone suitable for glossy treatment and smooth operation. One - time printing is sufficient. Coupled with the baking technique of slow temperature increase, Glossy Surface Silicone can avoid wrinkling and ensure the effect. The 120 - mesh screen ensures clear patterns and uniform material. The drying temperature of 120 - 150°C is reasonable, which can achieve rapid curing without damaging the performance of the fabric and the colloid. The finished product is shiny and durable, suitable for scenarios where a high - gloss effect is pursued.

1. Use an electronic scale, take an appropriate amount of Glossy Surface Silicone, add it to the mixture with a ratio of 10% (or 2%) using Curing Catalyst, and add an appropriate amount of Liquid Silicone Rubber Thinner according to the printing requirements, stir evenly.

2. Pour the prepared silicone mixture into the mesh plate and use a scraper to apply it.

3. Use Glossy Surface Silicone for glossy finishing. Only once round trip printing is required. Scrape the silicone on the screen clean with a slightly stronger force during the first printing. Then, during the second printing, use a slightly lighter force to let the silicone naturally drain dry in the mesh holes before uncovering the screen.

4. Wait for 2 - 3 minutes. After the silicone has completely defoamed, proceed with baking. In this way, a good bright light effect can be obtained.

Hot Tags: glossy surface silicone, China glossy surface silicone manufacturers, suppliers, factory, Silicone Anti Slip Ink for Glove Printing, Machine Print 3D Round Silicone, Industrial Silicone with Curved Printing Effect, High Gloss Silicone, Matte Surface Silicone, Molded Silicone Dots for Socks