Product Introduction
Machine-Print Nomal High Density Silicone is the "thickening expert" for machine printing. It is designed specifically for scenarios that require three - dimensional patterns. Machine-Print Nomal High Density Silicone's thickening effect can make the pattern protrude 1 - 3 millimeters. For example, the three - dimensional letters on T - shirts, the brand logos on sportswear pants, and the cartoon shapes on children's clothing. Using Machine-Print Nomal High Density Silicone as a base, the pattern can instantly transform from flat to three - dimensional with a distinct tactile feeling. It has excellent compatibility with most fabrics such as cotton, linen, and chemical fibers, and has strong adhesion. Even if Machine-Print Nomal High Density Silicone is machine - washed or hand - washed, it will not fall off. What's most reassuring is its "anti - foaming property" - even when the temperature rises rapidly during drying, there will be no annoying small bubbles. When mass - producing, there is no need to worry about defective products caused by bubbles, which greatly reduces costs. The operating time is as long as 45 minutes, which is sufficient for the machine to change plates and adjust pressure midway. The drying temperature of 120 - 150℃ can make Machine-Print Nomal High Density Silicone quickly set and solidify within 20 minutes, improving the machine's operating efficiency without damaging the fabric. The thickened part has good elasticity, can quickly rebound after being pressed, and will not become hard or brittle, without affecting the comfort of wearing or use at all
Product Advantages
The most prominent advantage is the significant thickening effect, which can make the pattern protrude 1 - 3 millimeters, with a strong three - dimensional sense and distinct tactile feeling, enhancing the visual and tactile experience of the product. Machine-Print Nomal High Density Silicone has good compatibility with a variety of fabrics, strong adhesion, is resistant to washing, and has high durability. The "anti - foaming property" avoids defective products caused by bubbles, reduces costs, and is suitable for mass production. The operating time is 45 minutes, which is sufficient for the machine to adjust midway, with high flexibility. The drying temperature of 120 - 150℃ is reasonable, and Machine-Print Nomal High Density Silicone can be quickly solidified in 20 minutes to improve efficiency without damaging the fabric. The thickened part has good elasticity and does not become hard, ensuring the comfort of use, and is suitable for machine - printing scenarios that require a three - dimensional effect.
Product Operation Process
1. Use an electronic scale, take an appropriate amount of Machine-Print Nomal High Density Silicone, add it to the mixture with a ratio of 10% (or 2%) using Curing Catalyst, and add an appropriate amount of Liquid Silicone Rubber Thinner according to the printing requirements, stir evenly.
2. Pre - adjust the parameters of the machine. Pour the prepared silicone mixture into the machine.
3. For the first printing, you need to scrape the silicone clean with force, leaving a clear silicone base (which is convenient for thickening later). After printing 4 - 5 times, you can start to thicken. After each printing, it needs to be dried before the next printing.
4. When building up thickness, there is no need to use a scraper with great force. Use a medium force to scrape the screen in a continuous motion from top to bottom twice. After printing 4 - 5 times, a good thickness - building effect can be achieved. After each printing, it needs to be dried before the next printing.
Hot Tags: machine-print nomal high density silicone, China machine-print nomal high density silicone manufacturers, suppliers, factory, Silicone Anti Slip Ink for Glove Printing, Machine Print 3D Round Silicone, Industrial Silicone with Curved Printing Effect, High Gloss Silicone, Matte Surface Silicone, Molded Silicone Dots for Socks
