Product Introduction
Molded Silicone is an expert in creating three - dimensional silicone patterns on fabrics. It can produce complex 3D patterns, accurately presenting both multi - layer stacked patterns and curved shapes. Molded Silicone has strong adhesion, and the pattern edges won't fall off even when pulled hard. The operation is not complicated. Just apply the silicone into the mold, press it on the fabric, and after curing, demold. Novices can learn it after trying a couple of times. Molded Silicone is compatible with most fabrics, such as cotton, polyester, and knitted fabrics. The patterns made have a delicate hand - feel, not as hard and uncomfortable as some stiff three - dimensional decorations. However, it needs to be shaped by a mold. Choosing the right mold can make the edges and curves of the pattern clear. Drying at 120 - 150°C is appropriate. Molded Silicone can cure in about 20 minutes, which doesn't delay production, won't damage the fabric, and can maintain the elasticity and adhesion of the finished product, keeping the three - dimensional pattern delicate for a long time.
Product Advantages
The core advantage is the ability to produce complex 3D patterns. Multi - layer stacking and curved shapes can be accurately presented, solving the printing problem of three - dimensional patterns. Molded Silicone has strong adhesion, the pattern edges are not easy to fall off, and it has good durability. The operation is simple, easy for novices to master, without the need for complex techniques, reducing the learning cost. It is suitable for a variety of fabrics such as cotton, polyester, and knitted fabrics, with good compatibility. Although it needs to be shaped by a mold, Molded Silicone can ensure clear pattern edges and curves, improving the refinement. The drying temperature of 120 - 150°C is reasonable. Curing in 20 minutes doesn't delay production, doesn't damage the fabric, maintains elasticity and adhesion. The three - dimensional pattern has a delicate hand - feel and is not uncomfortable. Molded Silicone is an ideal material for 3D pattern production.
Product Operation Process
1. Prepare a special mold for Molded Silicone, and clean the mold to facilitate demolding.
2. Use an electronic scale to weigh an appropriate amount of Mold Heat Transfer Printing Silicone, and dilute it with a curing agent at a ratio of 10% (or 2%), dilute it with Liquid Silicone Rubber Thinner, stir evenly.
3. Fill the prepared silicone into the mold, then invert the mold onto the base fabric, and place it in a special heat transfer machine.
4. Set the temperature of the machine. After preheating is completed, put the mold into it and heat for 10 - 30 seconds. After the mold cools down, uncover the base fabric.
Hot Tags: molded silicone, China molded silicone manufacturers, suppliers, factory, Silicone Anti Slip Ink for Glove Printing, Machine Print 3D Round Silicone, Industrial Silicone with Curved Printing Effect, High Gloss Silicone, Matte Surface Silicone, Molded Silicone Dots for Socks
