Product Introduction
Strength Silicone is an ideal choice for high-precision printing. It has extremely strong fastness - patterns printed on most fabrics are not easy to fall off even if vigorously scratched, and Strength Silicone has good stability. Strength Silicone has excellent elasticity and tensile strength. Whether it is a complex logo, three - dimensional letters, or a fine geometric pattern, the printed edges are extremely clear, without burrs or color bleeding, meeting the high requirements for clarity in high - end printing. More conveniently, adding a liquid silicone rubber diluent can flexibly adjust the effect: adding a little can achieve the effect of ordinary high - density silicone; adding a bit more can give the roundness of round - effect silicone. After curing, the colloid has excellent elasticity and viscosity and adheres firmly to the fabric. A screen with 80 - 120 meshes and a drying temperature of 120 - 150°C are appropriate, which is efficient and does not damage the fabric and colloid properties.
Product Advantages
The most significant advantage is Strength Silicone's extremely strong fastness, which solves the pain point of easy pattern shedding and makes printed products more durable. The edge clarity is extremely high, which can accurately present complex and fine patterns, meeting the strict standards of high - end printing. The design of adjusting the effect through the diluent is flexible, allowing one material to be used as multiple, reducing the material reserve cost. After curing, the performance is stable, with excellent elasticity and viscosity, and firm adhesion. The screen with 80 - 120 meshes and the drying temperature of 120 - 150°C have good adaptability, are easy to operate and highly efficient, and have a high cost - performance ratio in high - precision and high - demand printing scenarios.
Product Operation Process
1. Use an electronic scale, take an appropriate amount of Reinforced Silicone, add 10% (or 2%) of Curing Catalyst, and then add an appropriate amount of Liquid Silicone Rubber Thinner for dilution, stir evenly.
2. Pour the prepared silicone mixture into the mesh plate and use a scraper to apply it.
3. For the first printing, you need to scrape the silicone clean with force, leaving a clear silicone base (which is convenient for thickening later). After printing 3 - 4 times, you can start to thicken. After each printing, it needs to be dried before the next printing.
4. When building up thickness, there is no need to use a scraper with great force. Use a medium force to scrape the screen in a continuous motion from top to bottom twice. After printing 3 - 4 times, a good thickness - building effect can be achieved. After each printing, it needs to be dried before the next printing.
Hot Tags: Strength Silicone printing inks, China Strength Silicone printing inks manufacturers, suppliers, factory, Circular Effect Silicone, Foamed Silicone, Leather Surface Screen Ink, Machine Gloss Silicone, Shoe Mesh Silicone Rubber, Thermal Transfer Intermediate Silicone Layer
