Product Introduction
The Shoe Upper Silicone is specifically designed for shoe uppers and sides, integrating anti - slip, wear - resistant, and decorative functions. When walking, the feet are less likely to slip inside the shoes, and the frequently - rubbed parts such as the toes and the sides of the shoes are not easily worn, thus extending the service life of the shoes. Printing patterns or logos on the shoes can also make them more fashionable and good - looking. Shoe Upper Silicone can be printed smoothly on various materials such as canvas, leather, or mesh uppers without falling off due to different fabrics. It also has excellent elasticity. When the upper deforms while wearing the shoes, it can stretch accordingly without cracking or falling off. During printing, Shoe Upper Silicone is not prone to glue seepage, so it will not stain the socks through the upper. Using a 120 - 150 mesh screen can ensure that the edges of the printed pattern are neat. Drying at 120 - 150℃ for more than half an hour will not delay the shoe assembly. After drying, it has an elastic feel and does not rub the feet.
Product Advantages
The core advantage is the integration of multiple functions. Shoe Upper Silicone combines anti - slip, wear - resistance, and decoration, not only enhancing the practicality of the shoes but also increasing their aesthetic appeal, thus meeting multiple needs of the upper. It is suitable for a wide range of fabrics. It can be printed on canvas, leather, and mesh, and has strong adhesion, not falling off due to different fabrics. Shoe Upper Silicone has good elasticity, can stretch with the deformation of the upper, is not easy to crack, and adapts to the daily use scenarios of the shoes. It is not prone to glue seepage, avoiding soiling the socks, which is a considerate detail design. The 120 - 150 mesh screen ensures the neat edges of the pattern. The drying temperature of 120 - 150℃ is reasonable, not delaying the assembly. After drying, Shoe Upper Silicone has a comfortable feel and does not rub the feet, making it an ideal material for upper printing.
Product Operation Process
1. Use an electronic scale, take an appropriate amount of Shoe Upper Silicone, add it to the mixture with a ratio of 10% (or 2%) using Curing Catalyst, and add an appropriate amount of Liquid Silicone Rubber Thinner according to the printing requirements, stir evenly.
2. Pour the prepared silicone mixture into the mesh plate and use a scraper to apply it.
3. For the first printing, you need to scrape the silicone clean with force, leaving a clear silicone base (which is convenient for thickening later). After printing 4 - 5 times, you can start to thicken. After each printing, it needs to be dried before the next printing.
4. When building up thickness, there is no need to use a scraper with great force. Use a medium force to scrape the screen in a continuous motion from top to bottom twice. After printing 4 - 5 times, a good thickness - building effect can be achieved. After each printing, it needs to be dried before the next printing.
Hot Tags: shoe upper silicone, China shoe upper silicone manufacturers, suppliers, factory, Silicone Anti Slip Ink for Glove Printing, Machine Print 3D Round Silicone, Industrial Silicone with Curved Printing Effect, High Gloss Silicone, Matte Surface Silicone, Molded Silicone Dots for Socks
