Product Introduction
The Super High Density Silicone is specifically designed for quickly printing thick patterns. Its high consistency is the core feature, enabling it to easily create high-thickness patterns. These patterns are wear-resistant and do not bleed, meeting the strict clarity standards of high-end printing. The high-viscosity characteristic reduces material waste during printing and can quickly increase the pattern thickness, resulting in high efficiency. Super High Density Silicone has a good priming effect on fabrics such as cotton and synthetic fibers, with strong adhesion, and is not easy to fall off after curing. When using it, note that a 100 - 120 mesh screen should be selected, and it is only used for priming, not for coloring or covering. Super High Density Silicone needs to be appropriately diluted before use. A curing temperature of 120 - 150°C is suitable, which can accelerate the production speed without damaging the fabric integrity and silicone performance, making the thick patterns stiff and firm.
Product Advantages
The most prominent advantage is the thick pattern printing ability brought by high consistency. Super High Density Silicone can quickly achieve a three-dimensional pattern effect, and the patterns are wear-resistant, do not bleed, and meet the clarity standards. The high-viscosity characteristic reduces material waste, cuts costs, and improves printing efficiency simultaneously. Super High Density Silicone has strong adhesion to fabrics such as cotton and synthetic fibers, and the priming effect is reliable, laying a solid foundation for subsequent printing. The screen selection and usage scenarios are clearly defined, avoiding misuse and making the operation more standardized. The reasonable curing temperature ensures efficiency while protecting the fabric and silicone performance, making the thick patterns both beautiful and durable, suitable for high-end scenarios where three-dimensional effects need to be emphasized.
Product Operation Process
1. Use an electronic scale,take an appropriate amount of Super High Density Silicone, add it to the mixture with a ratio of 10% (or 2%) using Curing Catalyst, and add an appropriate amount of Liquid Silicone Rubber Thinner according to the printing requirements,stir evenly.
2. Pour the prepared silicone mixture into the mesh plate and use a scraper to apply it.
3. For the first printing, you need to scrape the silicone clean with force, leaving a clear silicone base (which is convenient for thickening later). After printing 3 - 4 times, you can start to thicken. After each printing, it needs to be dried before the next printing.
4. When building up thickness, there is no need to use a scraper with great force. Use a medium force to scrape the screen in a continuous motion from top to bottom twice. After printing 3 - 4 times, a good thickness - building effect can be achieved. After each printing, it needs to be dried before the next printing.
Hot Tags: super high density silicone, China super high density silicone manufacturers, suppliers, factory, 3D Foam Coating Material, Machine Matte Silicone, Machine Printing Standard High Density Silicone, Mechanized Round Shaped Silicone Printing, Silicone Dot Molding for Hosiery, Spherical Effect Silicone
