Products Description
Appearance: Semi-transparent silicone liquid.
Ingredients: Organic silicone stabilizer. Mix them in the required proportion and let it set in the product mold for about 30 minutes.
Curing method: It cures at room temperature without the need for heating; after curing, it will turn into a soft and elastic rubber-like substance.
Usage: Suitable for making craft molds, small statue molds, plaster molds, resin molds, candle molds, relief molds, cultural stone molds, lotus lantern molds, etc.
Features
Low viscosity, high fluidity: It can automatically level and fill the mold cavity, suitable for complex patterns, reliefs, and hollow shapes.
Easy-to-remove air bubbles: After mixing, the bubbles can be removed by vacuum method, and the mold surface will be smooth without any air bubbles.
Simple curing: No heating required. The process is simple and highly efficient.
Extremely low shrinkage rate: ≤ 0.3% - 0.4%. The mold will not deform and the replication accuracy is high.
High copying ability: Capable of precisely reproducing fine textures, sharp edges and concave-convex effects.
Anti-tear resistance: Resistant to damage, capable of withstanding pulling forces, suitable for multiple demolding processes.
Easy demolding: After curing, the material becomes soft and elastic, and will not stick to the mold, allowing for easy removal.
Temperature range: -50℃ to 250℃. Capable of withstanding high-temperature pouring.
More moldings: It is corrosion-resistant, has a long service life, and the mold can be reused up to several hundred times.
Color customization: The color can be adjusted (red, blue, white, semi-transparent)
Applied range
Craftworks / Sculptures: Resin, gypsum, PU, candle molds.
Prototype models: Figures, plastic parts, ABS, PU, small batch replication.
Building decoration: relief sculptures, Roman columns, decorative lines.
Hardness
5 degrees, 10 degrees, 15 degrees, 20 degrees, 25 degrees, 30 degrees, 35 degrees
Instructions
1. The addition ratio of the curing agent should be 2% to 3%. Adjusting the ratio appropriately can change the operation time. In summer, it is recommended to add 2%, and in winter, 3%;
2. The curing environment temperature should be above 15 degrees, and the humidity should be 60% to 70%. If the temperature or humidity is too low, it will cause slow or difficult curing;
3. If the environmental temperature or humidity is too low, you can place it in a heated room or air-conditioned room, along with a humidifier - and use it to increase the temperature and humidity to accelerate the curing process.
guarantee
Industrial-grade silicone molds are manufactured by us. Located in China, we are a supplier, manufacturer, and factory. We offer wholesale services and provide price lists. Free samples are available. Hengyi Silicone Materials Co., Ltd.
Hot Tags: silicone liquid for molds, China silicone liquid for molds manufacturers, suppliers, factory
