1.Silicone be divided into to types according to its components: two-component and single-component.
2.Two-component Silicone is divided into three main types:10:1 system,100:2 system and 1:1 system
3. One-component Silicone is divided into two types: odorless one-component and acid glue. Acid glue reacts with air and solidifies, while odorless one-component Silicone reacts with temperature solidifies.
Two-component silicone screen printing silicone is generally 10;1 and 100;2.
The difference between manual printing and machine printing is that manual printing requires flexible operation and quick drying, while machine printing requires high temperature and long operating time and long-lasting silicone operation time. 10: 1-system silica gel can be differentiated and adjusted by the curing agent model (fast drying, medium drying, slow drying) to flexibly adjust the silica gel curing time to achieve a reasonable mix of manual printing and machine printing. The curing time of 100:2 silicone can be controlled by the amount of curing agent (add more and it will dry faster, add less and it will dry slower).Both have their own advantages
1:1 system mostly for dispensing silicone, such as underwear line drawing glue, webbing anti-slip filling, injection,etc.
In addition to the normal use of silica gel,there are also some functional additives, such as:Silicone thicker agent, Silicone accelerator, Silicone retardant,leveling agent,etc
